Why Does My Vehicle’s Engine Burn Oil?

The simple answer: It’s probably wearing out. Over time, the piston rings have likely become worn or stuck in their grooves, preventing them from sealing tightly against the cylinder wall. The tiny gap that has formed between the ring and cylinder wall allows oil to enter the combustion chamber and burn. Worn valve seals produce the same effect. You may also be using an oil with poor resistance to heat, causing the oil to evaporate.

The detailed answer: Engines can burn oil due to a few reasons.

• Worn or stuck piston rings
• Worn valve seals
• Unstable motor oil
• Excessively low oil viscosity

Most stock automotive pistons contain three rings. The top and second rings are responsible for pressing tightly against the cylinder wall andnew-rings-image sealing the combustion chamber, keeping combustion gases in and oil out. The oil ring scrapes oil off the cylinder wall on the way down the cylinder, depositing it back into the oil sump. Because an extremely thin film of oil lubricates the ring/cylinder wall interface, it is normal for some oil to burn during combustion. What constitutes “normal” oil consumption, however, depends on the engine.

Valve seals also help prevent oil from entering the combustion chamber. Because oil is present to lubricate the seals and keep them pliable, some oil will burn during combustion. Even so, newer engines shouldn’t burn much oil. In fact, you shouldn’t need to add much – if any – top-off oil between oil changes, particularly if you’re using a high-quality synthetic oil. But be sure to check your oil regularly just in case.

Blame it on friction

Despite our best efforts, things eventually wear out, including engines. Worn rings can allow a gap to form between the ring face and cylinder wall. During operation, oil can slip past the rings into the combustion chamber, where it burns. Worn valve seals also contribute to oil consumption.

Stuck rings as a result of heavy deposits can result in the same scenario. Using a conventional oil that fails to resist chemical breakdown can lead to ring-land deposits, which cause the rings to stick. When this happens, the piston rings no longer float in the cylinder liner and can lead to increased oil consumption (in addition to wear).

Where did the oil go?

porta-engine-imageYou may also be using a motor oil with poor heat resistance. Conventional motor oils contain light, unstable molecules that more easily lift out of the solution in the presence of high heat, much like the heat of the sun lifts water molecules out of a puddle. As a result, the oil level drops as the oil is converted to carbon deposits throughout your engine.

This is likely what happened with my Oldsmobile Intrigue back in the dark ages before I started working at AMSOIL. I used a cheap oil from a big-box retailer, and scratched my head in befuddlement each time the oil on the dipstick registered low. I even had a mechanic check for oil leaks (he found none).

 

Use the correct viscosity of oil

Another possibility, albeit less likely, is you’re not using the correct viscosity of motor oil for your engine. Viscosity is defined as resistance to flow, but it’s easier to think of it as thickness. The lower the viscosity, the thinner the oil. As you can imagine, thinner oil will slip past worn rings or valve seals easier than thicker oil.

The correct oil viscosity for your engine is probably printed on the oil filler cap. If not, you can find it in the owner’s manual or the AMSOIL Product Guide.

Some manufacturers recommend a range of viscosities depending on your climate (e.g. 5W-20 when it’s cold, 10W-30 when it’s above 0ºF). Using the highest recommended viscosity can help close the gap between the rings and cylinder wall, reducing oil consumption.

Use an oil that fights wear and deposits

You can fight wear and deposits that lead to oil consumption by using a high-quality synthetic motor oil. AMSOIL Signature Series Synthetic Motor Oil delivers:

75% more engine protection against horsepower loss and wear than required by a leading industry standard*, extending the life of vital components like pistons and cams
93% cleaner pistons than required by a leading industry standard*

*Based on independent testing of AMSOIL Signature Series 5W-30, in ASTM D7320 as required by API SN specification.

Personal experience

My own VW Jetta 2.0 known to use oil – we solved that with the engine flush and “classic” 5W-40 European oil.  The flush seemed to cause something to do with the rings to re-seal.. Can’t say more than that but it certainly eliminated a quart usage/burning over 3000 miles.
I did this after dozens of my own customers found the same results so my own customers sold me on this AMSOIL product!!

 

Oil Analysis Kits Available from Oil Analyzers Inc. Ed Newman|May 10, 2022 2:38 PM   In order to provide a cost-effective oil analysis option when a full fluid analysis is not required, Oil Analyzers Inc. has launched a new Oil Analyzers Value Kit that focuses on the most critical used-oil analysis tests. It provides less […]

Racer Secrets: Tips and Tricks to Help on Race Day Lindsay Premo|Oct 16, 2020 8:00 AM Happy October, race fans! There are a lot of things we know are necessary in racing. A helmet, driver’s suit, gloves, appropriate footwear and (obviously) something to race on/in are all essential to striving toward that checkered flag. But, […]

First Time Heading to Sturgis? We’ve Got Some Tips. Jamie Jarvi|Aug 03, 2016 9:26 AM The Sturgis Motorcycle Rally is a true bucket-list destination for any motorcycle enthusiast. Each year thousands upon thousands of riders descend on Sturgis, S.D., and turn this small, sleepy town into a motorcycle mecca. Some travel the road to Sturgis […]

AMSOIL synthetic motor oil helps you breathe easier Oxygen is great in your lungs, but it’s not so great in your motor oil. Matt Erickson | VP, PRODUCT DEVELOPMENT Oxygen comprises about 20% of our atmosphere. It’s the third most common element in the universe. Without it we’d all be doomed. Yet, oxygen can cause […]

How to Maximize Marine Engine Performance and Reliability John Baker|May 02, 2022 10:36 AM   Fishing opener is right around the corner for us Northlanders. It’s essentially a regional holiday, rivaled only by the opener of gun deer season in the fall. Although some boaters and anglers don’t realize it, using a dedicated marine motor […]

Zeroturn Spindle

Best Practices for Your Zero-Turn Mower First, we’ll start with a question. How did we survive before Zero-Turn mowers? What did they do in the 50’s? Did they not cut the grass? Chris Sharon|Sep 07, 2022 8:00 AM Here at AMSOIL, we’re always investigating ways we can help you get the most out of your […]