Arctic Synthetic Grease AMSOIL Arctic Synthetic Grease provides extreme low-temperature pumpability and superior protection for equipment operating in harsh climates where temperatures drop well below freezing, ensuring superior load and wear protection where conventional greases are ineffective.
Performance Features
- Outstanding cold-temperature pumpability
- Excellent mechanical stability
- Superior protection against wear and corrosion
- Long service life
- Withstands high loads and pressures
Application Recommendation
AMSOIL Arctic Synthetic Grease is recommended for industrial machinery, heavy-duty automotive and industrial equipment, chassis, bearings, off-road and heavy equipment operating in arctic climates.
Compatibility
AMSOIL Arctic Synthetic Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Arctic Synthetic Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.
AMSOIL PRODUCT AVAILABILITY
AMSOIL Arctic Synthetic Grease is available in 15-ounce cartridges.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). An MSDS is available via the Internet at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children. Don’t pollute.
For warranty information, visit www.amsoil.com/warranty.aspx.
| Thickener | calcium sulfonate complex |
|---|---|
| NLGI consistency grade | 1 |
| Penetration (25°C [77°F], 0.1 mm) worked 60 strokes (ASTM D217) | 310-340 |
| Operating Range, °F (°C) | -75 to 315 (-59 to 157) |
| Four-ball wear test, mm scar (ASTM D2266) | 0.51 |
| Rust and corrosion (ASTM D-1743) | pass |
| Four ball EP, kgf (ASTM D-2596) Weld point | 400 |
| Load wear index | 56 |
| Timken OK load test, lbs (ASTM D-2509) | 60 |
| Low-temperature torque, N•m (ASTM D-4693) (-40°C [-40°F]) (Starting, Running torque) | 1.28, 0.58 |
| LT-37 US Steel Mobility @ 0°F (g/min) | 156.5 |
| US Steel Mobility @ -20°F (g/min) | 81.5 |
| Dropping point, °F (°C) (ASTM D2265) | >550 (>288) |
| Rust and corrosion (ASTM D1743) | pass |
| Oil viscosity, 40°C (104°F), cSt | 165 |
| Color | red |
| Texture | smooth with tack |
Current Offer – FREELEMON
