Fuel Efficiency is the result of less load.

A dealer recently sent in this testimonial from years back. His father was a stickler for quality and his skeptical manner required proof before being sold.

My dad was not a trusting man. He had lived through the Great Depression, and felt there were a great number of advertised products that were just too good to be true. So when AMSOIL synthetic motor oil came along, he did his own testing to expose or verify the fuel savings claims. (Dad was and electronics scientist.)

Vintage Onan Gasoline Generator benefits with Synthetic Oil

Vintage Onan Gasoline Generator

Report on tests made with AMSOIL synthetic motor oil in an Onan Power Plant:

One pint tin can had a copper tube soldered into the bottom of it, and connected to the engine for the test run, the engine was warmed up and let run out of gas then the can was refilled and with the load for that run, was started and let run until it ran out of gas again. In all tests a digital clock was used.

First, the tests were done with petroleum oil:

First, the tests were done with petroleum oil: With one heater used as a load, the test was done three times. The average time for three runs was 23 minutes and 38 seconds.

With two heaters as a load, the test was done three times. The average time for the rns was 16 minutes and 2 seconds.

Then he changed the engine to AMSOIL synthetic motor oil, and ran the engine for four hours before re-testing:

With one heater as a load, the test was done three times. The average time for three runs was 26 minutes and 7 seconds.

With two heaters as a load, the test was done three times. The average run time for the three runs was 18 minutes and 36 seconds.

Increase in run time using AMSOIL synthetic motor oil proves the fuel savings: With one heater as the load: about 10.5% increase in economy. With two heaters as the load: about 15.9% more efficiency.


 This test was made with machines rather than in a car, and was not affected by driver and driving conditions. The test was in 1977 by Charles Davison

Needless to say the writer’s father used AMSOIL for the rest of his life. He used the products in his cars and his RV,. In spite of a higher costs up front, he saw the benefits he gained from extended use of the products in both maintenance costs and longer equipment life.

Dale Martin Davison

AMSOIL: Thank you for sharing this innovative and interesting story. Email letters to: letters@amsoil.com

AMSOIL also eliminates deposits and issues which shorten engine life.

We had a neighbor who repeated an exact scenario with a welding generator which when switching from a competitor oil to AMSOIL they gained 1-hour in run time. Seems the larger the generator and the larger the load, the more difference one will see.  But any generator or combustion engine will last longer regardless of the fuel you save. Stationary single speed engines need a premium quality oil more than other oils. Engine life is significantly extended if a real synthetic is used early on.

The AMSOIL product most recommended for gasoline and diesel generators is the Formula Four Stroke Commercial Grade SAE-30/10W-30. Product code: ASE

Tires in snow

Are you ready for the Surprises of winter driving? Tips to prepare your vehicle for hazardous roads before winter arrives. _by David Hilgendorf |October 2024 Ice storms are most common when the air temperature is close to freezing and blizzards become more likely as temperatures fall below freezing. Both can reduce visibility and create slippery […]

Noack Volatility

Low-Volatility motor oil helps unlock vehicle performance   To meet today’s strict motor oil specifications and adequately protect modern engines, motor oils must demonstrate increased resistance to volatility. Nearly 30 years ago AMSOIL became the first oil manufacturer in the United States to use the NOACK Volatility Test (ASTM D5800) as a measure of performance […]

automatic transmission issues

Do Transmission Fluid Additives Work? John Baker| Feb 26, 2024 9:04 AM Walk the aisles of most auto parts stores and you’ll find multiple “mechanic-in-a-bottle”-type additives that claim to restore transmission performance. The claims made typically include some variation of the following: • Frees stuck valves to improve shifting • Fixes transmission slipping • Restores smooth […]

Understanding Oil Viscosity Viscosity is the measure of a fluid’s resistance to flow. _by David Hilgendorf|January 17, 2023 The physical properties of lubricants are measured by characteristics like viscosity, shear stability, high- and low-temperature performance, water resistance and volatility. Lubrication science seeks to optimize a lubricant’s performance by managing these properties using different base oils […]

Top 5 Skid Steer Maintenance Tips _by David Hilgendorf|September 29, 2023 Skid steers are built for tough construction, excavation, agricultural and other professional projects. Whether you’re clearing land, moving rocks or tearing down a wall, a skid steer is an excellent piece of equipment for many different jobs. But these nimble machines can be expensive […]

thermal runaway occurs when viscosity drops out and wear increases

How Often Should I Change Differential Fluid? Fluid change intervals depend on your vehicle, driving conditions and gear oil quality. Save time and cash first by improving the situation with this differential fluid solution! _by David Hilgendorf|Feb 26, 2023 A differential is a set of gears that allows a vehicle’s driven wheels to revolve at […]