High-Viscosity Lithium-Complex Synthetic Grease Industrial Synthetic Lubricant A lithium-complex thickened grease blended with premium ISO-320 synthetic base oils. Additives provide EP protection, oxidation resistance and rust and corrosion protection. Excellent for use in heavy-duty industrial and off-road applications where equipment is working under adverse conditions.
AMSOIL High-Viscosity Synthetic Grease is a lithium-complex-thickened grease blended with premium ISO 320 synthetic base oils. It is fully compounded with additives, providing superior extreme-pressure protection, oxidation resistance and corrosion protection. AMSOIL High-Viscosity Synthetic Grease is shear stable, maintaining its viscosity and consistency in the presence of mechanical activity. It also stays in place by resisting water washout. During high-temperature operation, AMSOIL High-Viscosity Grease’s base oils resist thermal breakdown, providing a thick film for excellent protection. AMSOIL High-Viscosity Synthetic Grease adheres to critical components in severe conditions to promote optimum operation, resulting in increased uptime and reduced repair and maintenance costs.
AMSOIL High-Viscosity Synthetic Grease is excellent for use in heavy-duty industrial and off-road applications where equipment operates under adverse conditions, including exposure to environmental elements, slow, heavily loaded applications and shock-loading conditions. Its lithium-complex thickener system, high-viscosity base oil and high-quality additives perform in hostile environments and extreme applications where typical multi-purpose greases may not.
Resists Water Washout
AMSOIL High-Viscosity Grease is formulated with excellent cohesion and adhesion properties that help it resist water washout. It stays in place longer, resulting in reduced maintenance time. Protects Against Oxidation and Corrosion AMSOIL High-Viscosity Grease contains a robust package of oxidation inhibitors that helps prevent grease breakdown and component surface damage. A premium blend of corrosion inhibitors further protects components against rust and corrosion formation.
Excels in High Temperatures
AMSOIL High-Viscosity Grease is engineered for exceptional performance in high-temperature applications. Its premium ISO 320 synthetic base oil and high-quality lithium-complex thickener work together to provide superior protection in severe operating conditions (up to 177˚C (350˚F) in continuous service and up to 204˚C (400˚F) in intermittent service).
Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Prevent over-greasing as this can result in excessive heat buildup. Supplement standard grease maintenance by periodically cleaning and packing housings with fresh grease on an established maintenance schedule.
AMSOIL High-Viscosity Synthetic Grease is compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of AMSOIL High-Viscosity Synthetic Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.
AMSOIL High-Viscosity Lithium-Complex Synthetic Grease is available in 14-oz. cartridges, 35-lb. pails, 120-lb. kegs.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). USA and Canada (M)SDS are available upon request at 715-392-7101 or on the AMSOIL Website. Keep Out of Reach of Children.
|Thickener Type||Lithium Complex|
|Worked Penetration (ASTM D217)||285|
|Dropping point, °C (°F) (ASTM D2265)||275 (527)|
|Rust (ASTM D1743)||Pass|
|Timken OK Load, lbs. (ASTM D2509)||60|
|Four Ball Weld Point, kgf (ASTM D-2596)||315|
|Water Washout, % (ASTM D-1264)||2.5|
|Base Oil Viscosity, cSt @ 40˚C (ASTM D445)||325|
|Copper Corrosion (ASTM D-4048)||1B|
|Oil Separation, % weight loss (ASTM D1742)||1.5 max.|
|Four-Ball Wear, mm (ASTM D4170)||0.52|