Most “electrified” vehicles still use motor oil

The auto industry is changing, but not the Dealer opportunity.

Matt Erickson | DIRECTOR, TECHNICAL PRODUCT MANAGEMENT

Does do term “electrification” make you fear for the future of the internal combustion engine and your Dealership?

As we explained in the April 2018 AMSOIL Magazine and again at the 45th Anniversary Convention last summer, it shouldn’t.

The truth about vehicle electrification is far different than some headlines lead you to believe. Let’s use Fiat Chrysler Automobiles (FCA)* as an example. FCA grabbed headlines last summer when it pledged $10,5 billion to electrifying its vehicle lineup, including Jeep* and RAM*. The story made news for a couple reasons. 1) Judging by the glut of headlines in my inbox, media outlets love any story about vehicle electrification and 2) FCA is considered a laggard on vehicle electrification compared to its competitors. Its announcement signals that even the holdouts have acknowledged that the future of the auto industry includes electrification.

Constantly seeing stories in your newsfeed about automakers pouring money into electrification can understandably make you nervous. Who’s going to buy the products you sell?

But you can relax. If there is one point you take from this column, make it this:

“Electric” and “Electrified” are Vastly  Different

Notice that FCA (and other automakers) are moving toward electrification, which simply refers to vehicles that have an electric motor somewhere in the drivetrain. This includes several different hybrid vehicles, including the following:

  • Micro hybrid – Vehicles with stop-start technology, like the Ford* F-150*
  • Mild Hybrid Electric Vehicle (MHEV) – The electric motor cannot propel the vehicle alone; it’s mainly used for engine start, regenerative braking and acceleration assist.
  • Full Hybrid Electric Vehicle (FHEV) – The electric motor alone can propel the vehicle, but has a limited range. See the Toyota* Prius*.
  • Plug-in Hybrid Electric Vehicle (PHEV) – Same as a FHEV, but adds a second way of charging the battery. Uses an engine due to limited electric-motor range. See the Ford C-MAX Energi*.

All four of these hybrid vehicle types use an internal combustion engine and require motor oil.

Here’s where the confusion arises: the following electric vehicles are also included under the broad category of “electrified” vehicles:

  • Range Extender Electric Vehicle (REEV) – A battery electric vehicle that includes an internal combustion engine-driven generator to charge the batteries. See the Chevy* Volt*.
  • Battery Electric Vehicle (BEV) – Propelled only by battery-powered electric motors, like the Nissan* Leaf*.
  • Fuel Cell Electric Vehicle (FCEV) – Uses an electric motor, but stores energy in a hydrogen tank instead of batteries. See the Honda* Clarity*.

Although common sense suggests that a Nissan Leaf is drastically different than a pickup truck whose engine shuts off at stoplights, the auto industry says otherwise. So, when an automaker announces its plans to introduce electrified vehicles, many people falsely assume they’re referring only to electric vehicles that don’t use an internal combustion engine. Some media outlets contribute to the confusion by interchanging „electrified“ and “electric.” The fact is, however, the push toward electrification includes widespread use of drivetrain systems that still use a conventional engine. Take, for example, the 2019 RAM pickup with eTorque and a 48-volt mild hybrid system. The system replaces the engine’s alternator with a belt-driven motor/generator that contributes torque, smooths shifts and recovers energy, where it’s stored in a lithium-ion battery. This application of electrification increases fuel economy about 2-3 mpg for the 3.6L engine;  the 5.7L Hemi engine and its classic rumble still remain available. (about the same as many customers say our Signature Series and PI Injector Cleaner does to their mileage).

Yes, electrification is here – and it will only grow in the ensuing years. But it’s not as scary as the headlines may have you believe. Most vehicles will still require motor oil and other lubricants. In fact, an estimated 92 percent of vehicles on the road worldwide in 2030 will still use an internal combustion engine. These new drive train technologies will present challenges to lubricants best addressed by high performance synthetics; the lubricant market is headed our way.

Local note – the oil change intervals are actually increasing for these vehicles as they use less oil causing the oil’s additives to last for shorter periods. World-wide finished lubricant sales have actually increased with the advent of these engine categories listed above. It also causes one to have a 2nd back-up ICE engine further adding to lubricant needs.

Tires in snow

Are you ready for the Surprises of winter driving? Tips to prepare your vehicle for hazardous roads before winter arrives. _by David Hilgendorf |October 2024 Ice storms are most common when the air temperature is close to freezing and blizzards become more likely as temperatures fall below freezing. Both can reduce visibility and create slippery […]

Noack Volatility

Low-Volatility motor oil helps unlock vehicle performance   To meet today’s strict motor oil specifications and adequately protect modern engines, motor oils must demonstrate increased resistance to volatility. Nearly 30 years ago AMSOIL became the first oil manufacturer in the United States to use the NOACK Volatility Test (ASTM D5800) as a measure of performance […]

automatic transmission issues

Do Transmission Fluid Additives Work? John Baker| Feb 26, 2024 9:04 AM Walk the aisles of most auto parts stores and you’ll find multiple “mechanic-in-a-bottle”-type additives that claim to restore transmission performance. The claims made typically include some variation of the following: • Frees stuck valves to improve shifting • Fixes transmission slipping • Restores smooth […]

Understanding Oil Viscosity Viscosity is the measure of a fluid’s resistance to flow. _by David Hilgendorf|January 17, 2023 The physical properties of lubricants are measured by characteristics like viscosity, shear stability, high- and low-temperature performance, water resistance and volatility. Lubrication science seeks to optimize a lubricant’s performance by managing these properties using different base oils […]

Top 5 Skid Steer Maintenance Tips _by David Hilgendorf|September 29, 2023 Skid steers are built for tough construction, excavation, agricultural and other professional projects. Whether you’re clearing land, moving rocks or tearing down a wall, a skid steer is an excellent piece of equipment for many different jobs. But these nimble machines can be expensive […]

thermal runaway occurs when viscosity drops out and wear increases

How Often Should I Change Differential Fluid? Fluid change intervals depend on your vehicle, driving conditions and gear oil quality. Save time and cash first by improving the situation with this differential fluid solution! _by David Hilgendorf|Feb 26, 2023 A differential is a set of gears that allows a vehicle’s driven wheels to revolve at […]