Synthetic Anti-Wear Hydraulic Oil - ISO 22
Protects hard-working hydraulic systems from the stress of high-pressure, high-load and heavy-duty operations. Remains fluid in cold temperatures for immediate cold-weather flow. Special anti-wear additives and rust inhibitors provide optimum protection to expensive equipment.
Designed for Excessive Pressures, Heat and Speed – AMSOIL Anti-Wear ISO 22 Synthetic Hydraulic Oil
Around 30 years ago AMSOIL examined the best available hydraulic fluids available which were all lacking under intensive abuse. The performance available from their own proprietary synthetic formulations put this far ahead. Customers notice better start-up performance, faster action under intense heat and extreme cold and less fade under extreme pressure. Quite a difference in all uses of hydraulic systems in both factory and heavy equipment.
Protects hard-working hydraulic systems from the stress of high-pressure, high-load and heavy-duty operations. Remains fluid in cold temperatures for immediate cold-weather flow. Special anti-wear additives and rust inhibitors provide optimum protection to expensive equipment.
AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are shear-stable, long-life lubricants based on high-quality synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation to help prevent acid formation and viscosity increase and inhibit rust and foam (providing smooth hydraulic operation). AW Oils contain a very effective zinc-based anti-wear/antioxidant additive which controls wear in high-speed, high-pressure vane and gear pumps while meeting the lubrication requirements of axial piston pumps with bronze-on-steel metallurgy. Improved pump efficiency can increase hydraulic power, reduce fuel consumption and improve productivity. AW Oils are designed for long life and can typically reduce maintenance costs by extending drain intervals and reducing labor costs, repairs and downtime.
AMSOIL Synthetic Base Oil Technology
AMSOIL synthetic base oils resist thermal and oxidative breakdown, reducing varnish deposits. The very high viscosity indices, low pour points and lack of paraffins (wax) make these good all-season lubricants well-suited for high and low temperature extremes. At high temperatures and pressures, AMSOIL AW Series Oils provide a good lubricating film and protect components against wear. During cold-temperature operation, equipment starts easier and the need for preheating with sump heaters is reduced. The AW Series base oils also readily separate from water, preventing oil/water emulsions that inhibit lubrication and allowing for longer lubricant life and easier water drainage from the sump.
Performance Features
Antiwear protection for high-pressure systems
Recommended for gear, vane and piston pumps
Contain rust, oxidation and foam inhibitors
Designed for extreme-temperature operation
Hydrolytically stable and readily separate from water
Application Recommendation
The correct viscosity grades of AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are recommended for high- and low-pressure gear, vane and piston stationary and mobile hydraulic systems. They are excellent for general-purpose use where extended drain intervals are desired and in severe-duty operations where temperature extremes are encountered.
AMSOIL AW Series Oils are compatible with hydraulic system seals, petroleum hydraulic oils and most synthetic hydraulic oils*. For optimum performance, it is recommended the system be thoroughly drained and, if warranted, cleaned prior to installation. Oil analysis is recommended to maximize oil drain intervals.
* Not compatible with phosphate ester, silicone or water-based fluids.
AMSOIL recommends the Synthetic AW Series Hydraulic Oils for use where the following specifications are required:
Denison HF-0, HF-1 and HF-2
Vickers M-2950-S and I-286-S
Cincinnati Milacron P-68, P-69 and P-70
U.S. Steel 127
Racine, variable volume vane pumps
DIN 51524, Parts 2 and 3 HLP22-HLP46
SEB 181222 HLP22-HLP68
ASTM D-6158 HV
AFNOR E 48-603*
Ford M6C32
GM LH-04-1, LH-06-1 and LH-15-1
Lee Norse 100-1
Jeffrey No. 87
BF Goodrich 0152
Commercial Hydraulics*
* Except for PM-500 series silver-containing pumps which require R&O additive systems.
AMSOIL PRODUCT AVAILABILITY
AMSOIL industrial lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special-order products based on customer requests and regional demands.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty.aspx.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS). USA and Canada (M)SDS are available upon request at 715-392-7101 or on the AMSOIL Website. Keep Out of Reach of Children.
What Does a Limited-Slip Additive Do? Joel Youngman|Oct 27, 2020 10:50 AM You see them on the shelves of your local auto parts stores, but what does a limited-slip additive do? Limited-slip differentials commonly use clutches to transmit torque between wheels. When both wheels have ample traction, the clutch plates bind together tightly, but smoothly slip […]
A must upgrade for Polaris Rangers is our indestructible 100% Synthetic 0W-50 UTV and ATV oil The way a lot of our customers use their ATV’s demand proper lubrication and cooling when most competitor oils sheer out. Why pay more for an oil that isn’t the viscosity you paid for after a few uses? You […]
