Ea® AMSOIL ByPass Oil Filter

AMSOIL Absolute Efficiency Oil Filter

AMSOIL Ea By-Pass Oil Filters provide maximum filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, AMSOIL Ea By-Pass Filters operate by filtering oil on a “partial-flow” basis. They draw approximately 10 percent of the oil pump’s capacity at any one time and trap the extremely small, wear-causing contaminants that full-flow filters can’t remove. AMSOIL Ea By-Pass Filters typically filter all of the oil in the system several times an hour, so the engine continuously receives analytically clean oil.

Higher Efficiency
AMSOIL Bypass Oil Filters have an efficiency of 98.7 percent at two microns. At normal operating RPM Ea By-Pass Filters will filter all of the oil in a typical five-quart sump in less than 10 minutes.

Superior Construction
The superior construction of AMSOIL Ea By-Pass Filters provides better sealing and increased longevity along with superior corrosion resistance.

AMSOIL Ea By-Pass Filters have a marine powder-coated exterior, and their zinc-dichromate base plates increase rust protection. Ea By-Pass Filters feature a nitrile HNBR gasket, an orange silicone anti-drain valve and two-stage pleated and layered cellulose/full-synthetic media.

Longer Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL Ea or Donaldson® Endurance™ Full-Flow Oil Filter, Ea By-Pass Filters should be changed every other full-flow filter change up to 60,000 miles. When used with other brands of motor oil or full-flow filters, Ea By-Pass Filters should be changed every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.

Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved oil cooling and ensures that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended engine life.

Soot Removal
AMSOIL has designed a high-efficiency by-pass filter element that is also a soot removal device. AMSOIL Ea By-Pass Filters use a synthetic/cellulose sandwiched media. The inner layer of the element is composed of a highly efficient cellulose media covered with a full-synthetic media outer layer. According to ISO 23556 testing, Ea By-Pass Filters remove 39 percent of soot contaminants less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when an Ea By-Pass Filter is used in conjunction with a standard full-flow filter.

By-Pass Filtration Benefits

• Dramatically Extended Drain Intervals
• Improved Oil Cooling
• Increased Filtration Capacity and Life
• Increased Fluid System Capacity
• Efficient Removal of Small Particles and Soot
• Significantly Extended Engine Life
• Increased Engine Efficiency
• Removal of Particles Less than One Micron

a. Filters can be used on sumps of larger capacity but then require more frequent replacement. Full details on service life included with filter installation instructions.

b. Data determined in a non-turbo gasoline engine with AMSOIL 100% Synthetic Motor Oil and AMSOIL Ea Full-Flow Oil Filter. Service life varies in other engines (turbo and diesel) and with other oils and filters.

NOTES:
1. Special adapters and hardware may be required for some installations.
2. Contact AMSOIL INC. Technical Services for instructions before installing on vehicles with cast aluminum oil pans.

APPLICATIONS

AMSOIL EaBP120 is not interchangeable with EaBP90, EaBP100, and EaBP110. Only EaBP90, EaBP100, and EaBP110 bypass filters are interchangeable.