DUAL-GARD Bypass System

Links two AMSOIL Bypass Filter Elements together for engines with sump capacities greater than 20 quarts. Includes Flow Restrictor without hardware, hoses or filter elements - 2 required. For use with EaBP90, EaBP100 or EaBP110 Element.

SKU: bmk22kit Category:
Buy and Pricing

PRODUCT DESCRIPTION
The Ea Bypass Oil Filter (EaBP) provides the best possible filtration protection against wear and oil degradation. Working in conjunction with the engine’s full-flow oil filter, the AMSOIL Ea Bypass Filter operates by filtering oil on a “partial-flow” basis. It draws approximately 10 percent of the oil pump’s capacity at any one time and traps the extremely small, wear-causing contaminants that full-flow filters can’t remove. The AMSOIL Ea Bypass Filter typically filters all the oil in the system several times an hour, so the engine continuously receives analytically clean oil.

bypass_dia_600px See Bypass Installation Samples

Typical Installation Diagram for BMK22 Kit.

Click on diagram for larger image
(Opens a new browser window)

See the Bypass Replacement Parts Lists

Higher Efficiency
AMSOIL EaBP Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes.

Superior Construction
The superior construction of AMSOIL EaBP Filters provides better sealing and increased longevity along with superior corrosion resistance. AMSOIL EaBP Filters have a marine powder coated exterior; and their zinc-dichromate base plates increase rust protection. EaBP Filters have a nitrile HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns.

Longer Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO or Donaldson Endurance™ filter, the EaBP90, 100 and 110 Filters should be changed every other full-flow filter change up to 60,000 miles or one year whichever comes first. When used with other brands of motor oil or full-flow filters, the EaBP Filter should be changed every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.

AMSOIL recommends changing the EaBP120 every other full-flow filter change up to 90,000 miles or one year whichever comes first. Extended oil drain intervals should always be accompanied by an oil analysis program.

Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved oil cooling and ensures that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended engine life.

Soot Removal
AMSOIL has designed a high-efficiency bypass filter element that is also a soot removal device. AMSOIL Ea Bypass Filters use a synthetic/cellulose sandwiched media. The inner layer of the element is composed of a highly efficient cellulose media covered with a full synthetic media outer layer. These filters remove 39 percent of soot contaminants less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the EaBP Filter is used in conjunction with a standard full-flow filter.

Bypass Filtration Benefits

  • Dramatically Extended Drain Intervals
  • Improved Oil Cooling
  • Increased Filtration Capacity and Life
  • Increased Fluid System Capacity
  • Efficient Small Particle and Soot Removal
  • Significantly Extended Engine Life
  • Equipment Constantly Runs on Clean Oil
  • Increased Engine Efficiency
  • Remove Particles Less Than One Micro
Buy and Pricing
Type of Unit Stock NumberSize (Approx.)Additional Oil NeededCrankcase CapacityEa Bypass Filters offer long service life. Do not exceed limits listed in chart below.Applications
BMK21 (single) or any DUAL REMOTE SYSTEM)EaBP90Diam. = 4.3 in.
Height = 5.8 in.
With Mnt. = 8 in.
1 qt.up to 9 qt.60,000 Miles
600 Hours
2-Years
Pleasure Vehicles, Light Trucks and Smaller Commercial Applications
EaBP100Diam. = 4.3 in.
Height = 7.3 in.
With Mnt. = 10 in.
1.5 qt.up to 15 qt.70,000 Miles
800 Hours
2-Years
EaBP110Diam. = 4.3 in.
Height = 10.4 in.
With Mnt. = 12 in.
2 qt.up to 21 qt.80,000 Miles
1,200 Hours
2-Years
SPIN-ON ELEMENT

(Used with BMK30
Heavy-Duty By-Pass System
EaBP120Width = 5.35 in.
Length = 12.12 in.
Height = 17.5 in
1-gallon15 to 42 quarts120,000 Miles
1,800 Hours
2-Years
Large Trucks, Construction, Farm and Industrial Equipment, (minimum sump capacity = 15 qt.), the BMK30 kit can be mounted in series for sump capacities greater than 42 quarts.
DUAL SPIN-ON ELEMENT

(Used with BMK22 DUAL-GUARD)
(2) EaBP90Width = 5 in.
Length = 9.5 in.
Height = 8 in.
2 qt.15 to 18 qtLarge Trucks, Construction, Farm and Industrial Equipment

(minimum sump capacity = 15 qt.)
(2) EaBP100Width = 5 in.
Length = 9.5 in.
Height = 10 in.
3 qt.15 to 30 qt
(2) EaBP110Width = 5 in.
Length = 9.5 in.
Height = 12 in.
4 qt.15 to 42 qt

Normal Service Life:When used in conjunction with AMSOIL motor oil and an EaO or Donaldson Endurance filter, the EaBP should be changed every other full flow filter change up to 60,000 miles. When used with other brands of motor oil or full flow filters, the EaBP filter should be changed every other full flow filter change. AMSOIL recommends using oil analysis when extending oil drain intervals.

Leave a Reply